Rohde & Schwarz RTM2032 - Page 419

Remote Control
R&S
®
RTM20xx
404User Manual 1317.4726.02 ─ 01
TRIGger:A:UART:POFFset <PatternByteOffset>
Sets the number of symbols before the first symbol of the pattern.
Parameters:
<PatternByteOffset> Number of ignored symbols
Range: 0 to 4095
Increment: 1
*RST: 0
UART - Decode Results
BUS<b>:UART:RX:FCOunt?...........................................................................................404
BUS<b>:UART:RX:FRAMe<n>:WCOunt?........................................................................404
BUS<b>:UART:RX:FRAMe<n>:WORD<o>:STATe?..........................................................404
BUS<b>:UART:RX:FRAMe<n>:WORD<o>:STARt?..........................................................405
BUS<b>:UART:RX:FRAMe<n>:WORD<o>:STOP?...........................................................405
BUS<b>:UART:RX:FRAMe<n>:WORD<o>:VALue?..........................................................405
BUS<b>:UART:RX:FCOunt?
Suffix:
<b>
.
1..4
Return values:
<FrameCount>
Usage: Query only
BUS<b>:UART:RX:FRAMe<n>:WCOunt?
Suffix:
<b>
.
1..4
<n> *
<o> *
Return values:
<WordCount>
Usage: Query only
BUS<b>:UART:RX:FRAMe<n>:WORD<o>:STATe?
Suffix:
<b>
.
1..4
<n> *
<o> *
Return values:
<Status> OK | FRSTart | FRENd | FRMError | STERror | SPERror |
PRERror | INSufficient | BREak
Command Reference