Rohde & Schwarz RTM2032 - Page 420

Remote Control
R&S
®
RTM20xx
405User Manual 1317.4726.02 ─ 01
Usage: Query only
BUS<b>:UART:RX:FRAMe<n>:WORD<o>:STARt?
Suffix:
<b>
.
1..4
<n> *
<o> *
Return values:
<StartTime>
Usage: Query only
BUS<b>:UART:RX:FRAMe<n>:WORD<o>:STOP?
Suffix:
<b>
.
1..4
<n> *
<o> *
Return values:
<StopTime>
Usage: Query only
BUS<b>:UART:RX:FRAMe<n>:WORD<o>:VALue?
Suffix:
<b>
.
1..4
<n> *
<o> *
Return values:
<Value> Range: 0 to 511
Increment: 1
Usage: Query only
15.2.13.6 CAN
CAN is the Controller Area Network, a bus system used within automotive network archi-
tecture.
Note: SPI/SSPI and UART protocols occupy two bus lines (bus 1 and 2 or bus 3 and 4).
If one of these buses is configured, the number of buses (suffix <b>) is reduced. Bus 2
and/or bus 4 is not available.
Command Reference