Remote Control
R&S
®
RTM20xx
407User Manual 1317.4726.02 ─ 01
Parameters:
<SamplePoint> Range: 10 to 90
Increment: 1
*RST: 50
Default unit: %
BUS<b>:CAN:BITRate <BitRate>
Sets the number of transmitted bits per second.
Suffix:
<b>
.
1..4
Selects the bus.
Parameters:
<BitRate> Range: 100 to 5,04E06, depends on instrument type, ADC
clock rate
Increment: depends on the bit rate value
*RST: 5,00E+004
Default unit: Bit/s
CHANnel<m>:THReshold:FINDlevel
Executes the analysis of all analog channels that are configured for the selected bus and
sets the threshold for digitization of analog signals for each channel.
Suffix:
<m>
.
Selects the input channel. The number of channels depends on
the instrument.
Usage: Event
CAN - Trigger
TRIGger:A:CAN:TYPE <TriggerType>
Specifies the trigger mode for CAN.
Command Reference
To Next Page
Loading...
