Rohde & Schwarz RTM2032 - Page 446

Remote Control
R&S
®
RTM20xx
431User Manual 1317.4726.02 ─ 01
Usage: Query only
BUS<b>:LIN:FRAMe<n>:BYTE<o>:STATe?
Returns the state of the specified data byte.
Suffix:
<b>
.
1..4
Selects the bus.
<n> *
Selects the frame (1...n).
<o> *
Selects the byte number (1...n).
Return values:
<ByteStatus> OK | INS | UART
The byte is not completely contained in the acquisition
UART
At least one UART error occured. LIN uses UART words without
parity bit.
Usage: Query only
BUS<b>:LIN:FRAMe<n>:BYTE<o>:VALue?
Returns the decimal value of the specified byte.
Suffix:
<b>
.
1..4
Selects the bus.
<n> *
Selects the frame (1...n).
<o> *
Selects the byte number (1...n).
Return values:
<ByteValue> Decimal value
Usage: Query only
LIN - Search
SEARch:PROTocol:LIN:CONDition..................................................................................432
SEARch:PROTocol:LIN:FRAMe......................................................................................432
SEARch:PROTocol:LIN:IPERror......................................................................................433
SEARch:PROTocol:LIN:CHKSerror.................................................................................433
SEARch:PROTocol:LIN:SYERror.....................................................................................433
SEARch:PROTocol:LIN:ICONdition.................................................................................433
SEARch:PROTocol:LIN:IDENtifier...................................................................................433
Command Reference