Ross Acuity 4810AR-002 - Page 10

Auto Recall.............................................................41
Auto Remove Key..................................................41
Aux Bus Names.....................................................42
Bank 0 Lit...............................................................42
BKGD Double Press..............................................42
CC/Macro Attachments..........................................42
CC Global Recall...................................................42
CC Held/Paused Display.......................................42
CC Memory State..................................................42
Clear Bus Hold on All-All........................................42
DD Key Delegation................................................43
Default Trans Active...............................................43
Default Trans Eff Rate............................................43
Default Trans FTB Rate.........................................43
Default Trans Key Rate..........................................43
Default Trans ME Rate..........................................43
Default Sequence Rate..........................................43
Double Press Rate.................................................43
DSK Auto Cut.........................................................43
Editor Pattern Codes..............................................44
Editor Trans Rate...................................................44
ExCamMoveOnTrans............................................44
Fixed Memories.....................................................44
FTB Display...........................................................44
Global Mem Num Entry..........................................44
Global-Store 4 Mode..............................................44
Grab Camera Time................................................45
GUI Scroll Controls................................................45
Key Cut Then Fade................................................45
Keypad Clip IDs Entry............................................45
Keypad DVE Num Entry........................................45
Keypad Still Num Entry..........................................45
Keypad Wipe Num Entry........................................45
Key Priority Display Order......................................45
Knob List Expansion..............................................46
Matte Limit.............................................................46
Memory Bank Cycle...............................................46
Menu Module Indicator..........................................46
Menu Numbers......................................................46
Mouse Sensitivity...................................................46
Multiple Customs...................................................46
Open Shortcut on Top............................................46
Panel Sleep Time...................................................46
Pbus Memory.........................................................47
Quick Bank Select..................................................47
Recall Empty Memory............................................47
Recall Global-Store................................................47
Recall ME-Store.....................................................47
Recall WhiteFlash..................................................47
Re-entry Depth.......................................................48
Re-entry Loops......................................................48
Roll Clip Mode........................................................48
Roll Clip On-Air Only..............................................48
Shift All Buses on a Row........................................48
Shift Locking..........................................................48
Show Attached CCs...............................................48
Show CCs on Key Bus...........................................49
Show Last CC Pressed..........................................49
Show Last Mem Recalled......................................49
Store Mode............................................................49
Swap Keyer Cut & Auto.........................................49
Swap PGM/PST Buses..........................................49
Swap Trans Cut & Auto.........................................49
Time Clock Source.................................................50
Time Clock UMD Number......................................50
UltraChrome Dflt Color...........................................50
UltraChrome Dflt Mode..........................................50
UltraChrome Dflt Width..........................................50
Virtual Panel Enable..............................................50
Virtual Panel Positioner Reset...............................50
VTR POL On-Air Display.......................................50
VTR POL Prepped Display....................................50
Wake Up On Command.........................................51
Default ME Map.....................................................................51
To Set Up a Default ME Map.................................51
Auto Follow............................................................................51
To Turn On Auto Follow.........................................51
To Set Up An ME Auto Follow................................52
To Set Up An Individual Auto Follow
Component.....................................................52
User Wipes............................................................................52
To Assign a User Wipe...........................................52
GPI Control........................................................53
GPI Trigger Types.................................................................53
To View the Status of a GPI..................................................53
To Name a GPI......................................................................53
To Set the Direction of a GPI.................................................53
GPI Inputs.............................................................................53
To Set Up a GPI Input............................................53
GPI Tallies.............................................................................54
To Set Up a GPI Tally.............................................54
GPI Outputs...........................................................................54
To Set Up a GPI Output.........................................54
GPI Device Control................................................................54
To Assign a GPI Output to a Video
Source............................................................54
Live Edit Decision Lists...................................55
To Set Up LiveEDL................................................................55
To Start Capturing EDL Data.................................................55
To Move EDL Files to USB....................................................55
To Delete EDL Files...............................................................55
MultiPanel..........................................................56
MultiPanel Setup...................................................................56
To Assign an ME to a Panel...................................56
To Set Up Installation Menu Permission................56
MultiPanel Operation.............................................................56
Color Schemes.................................................57
Menu Skins............................................................................57
To Select a Menu Skin...........................................57
Control Panel Button Colors..................................................57
To Select a Button Color........................................57
To Set Button Colors..............................................57
To Set Source Button Colors..................................58
To Load a Button Color Scheme............................58
To Save a Button Color Scheme............................58
Mnemonic Color Schemes....................................................58
x • Contents — Acuity Setup Manual (v9.2)