• Left to Right — keys are displayed in order from
lowest to highest numbered.
• Right to Left — keys are displayed in order from
highest to lowest numbered.
Knob List Expansion
Allows the knob list you are scrolling to expand to the
full size of the area for a period of time. This allows you
to see more of the list at one time.
Press HOME > Setup > Personality and use the
Option knob to select Knob List Expansion.
• Rate — select the amount of time, in frames, that
the knob list stays expanded. Select 0 to have the list
not expand.
Matte Limit
Sets whether or not the matte generators on the switcher
are limited to the RGB color space or not.
Press HOME > Setup > Personality and use the
Option knob to select Matte Limit.
• Off — the color range of the matte generators is not
limited.
• On — the color range of the matte generators is
limited to the RGB color space.
Memory Bank Cycle
Sets the maximum number of memory banks that you
will cycle through when pressing the Bank button on a
Memory Module.
Press HOME > Setup > Personality and use the
Option knob to select Memory Bank Cycle.
Note: This feature is disabled if Quick Bank Select is set to on.
• Use the Value knob to select the maximum number
of memory banks you want to cycle through, starting
from Bank00. By repeatedly pressing the BANK
button on the keypad of the Effects Memory modules
or Global Memory module, you can jump from bank
to bank.
Menu Module Indicator
Adds an icon (On) to the upper left corner of the upper
or lower menu region to indicate which menu the Menu
Module is showing.
Press HOME > Setup > Personality and use the
Option knob to select Menu Mod Indicator.
Menu Numbers
Adds a menu number (On) to the left of the menu title
on each branch of the menu system. Click the menu
number to enter a new menu number to navigate to. Only
the îš¿rst page of a menu has a number.
Press HOME > Setup > Personality and use the
Option knob to select Menu Numbers.
Mouse Sensitivity
Set the speed that the mouse pointer moves around the
screen when you move the mouse.
Press HOME > Setup > Personality and use the
Option knob to select Mouse Sensitivity.
• Use the Value knob to select a sensitivity, or speed,
for the mouse.
Multiple Customs
Set whether the switcher can run multiple custom controls
simultaneously or only one at a time.
Press HOME > Setup > Personality and use the
Option knob to select Multiple Customs.
Note: If OverDrive
®
is controlling the switcher, this feature is
locked to off.
• Off — allow multiple custom controls to run
simultaneously. Starting a custom control while a
custom control is running does not stop the other
custom control and the currently selected one starts.
• On — allow only one custom control to run at a time.
Starting a custom control while a custom control is
running stops the running custom control and starts
the new one.
Open Shortcut on Top
Forces the menus launched from the quick navigation
bars on the left of the menu to open in the top menu
region.
Important: Forcing the Installation menu to open
in the top menu region does not lock out the menu
system when the Installation menu is open. This can
cause unexpected behaviour and is not
recommended.
Press HOME > Setup > Personality and use the
Option knob to select Open Shortcut on Top.
• Off — menus open in the bottom menu region.
• On — menus open in the top menu region.
Panel Sleep Time
Sets the length of time before the switcher goes into sleep
mode.
Press HOME > Setup > Personality and use the
Option knob to select Panel Sleep Time.
46 • Personality — Acuity Setup Manual (v9.2)
To Next Page
Loading...
Need help?
General
