Ross Acuity 4810AR-002 User Manual

Color Schemes
The switcher can be customized for menu appearance,
button colors, and mnemonic colors.
Menu Skins
The appearance of the menus, including colors and icons,
can be customized by using one of the skins provided
with your switcher.
To Select a Menu Skin
1. Press HOME > Setup > Personality > Color
Scheme > More > More > Select Skin.
2. Use the Monitor Skin knob to select the skin you
want to use.
3. Press Select This Skin.
Control Panel Button Colors
You can change the glow color for MEs and AuxKeys,
as well as the on-air crosspoints, or apply a specic color
to an input. The color of the control buttons on the control
panel modules can also be edited.
To Select a Button Color
1. Press HOME > Setup > Personality > Color
Scheme > Select Buttons.
2. Use the Color knob to select the item you want to
change the color for.
Note: The B-side of a split ME uses the User Color 9.
3. Press Modify Color and use the color picker to
select the color you want to use..
To Set Button Colors
1. Press HOME > Setup > Personality > Color
Scheme.
2. Press Color Settings.
3. Use the Option and Use knobs to select how the
buttons are colored.
ColorButton
The color used when a source button
is selected.
• Item On Color — use the Item On
Color.
• ME Color — use the ME Glow
color.
Selected Xpts
ColorButton
The color used when a non-source
button is selected.
• Item On Color — use the Item On
Color.
• Item On Color — use the Item On
Color.
Selected Bttns
The color used for custom control
buttons.
• CC Color — use the CC Glow
color.
• ME Color — use the ME Glow
color.
Custom Controls
The color used for ME re-entry.
• No — use the ME Glow color for
the ME that the ME is re-entered
on.
• Yes — use the ME Glow Color for
the ME that is being re-entered.
Re-entry Glow
The color used for an ME.
• MEs Use Own Glows — use the
ME Glow color for each ME.
• All MEs Use Glow 1 — use the
ME Glow 1 color for all MEs.
ME Glow
The color used for source buttons.
• No — use the ME Glow color.
• Yes — use Xpt Color assigned for
each video source.
Xpt Colors
The color used for each key.
• Same as ME — use the ME Glow
color.
• User Colors — use the user
colors for the keys. For example,
Key 1 gets User Color 1, Key 2
gets User Color 2, etc.
• ME Colors — use the ME glow
colors for the keys. For example,
Key 1 get ME Glow 1, Key 2 gets
ME Glow 2, etc.
• Split ME Colors — use the B-side
color for the keys on the B-side of
a split ME (User Color 9). If a
keyer is assigned to both the A
and B side it uses the color
assigned to the A-side (ME Glow
color).
Keyer Colors
Acuity Setup Manual (v9.2) — Color Schemes • 57

Ross Acuity 4810AR-002 Specifications

General

Brand	Ross
Model	Acuity 4810AR-002
Category	Switch
Language	English