Ross Acuity 4810AR-002 User Manual

SignalPin
GPI I/O 23
GPI I/O 34
GPI I/O 45
GPI I/O 56
GPI I/O 67
GPI I/O 78
GPI I/O 89
GPI I/O 910
GPI I/O 1011
GPI I/O 1112
GPI I/O 1213
GPI I/O 1314
GPI I/O 1415
GPI I/O 1516
GPI I/O 1617
GPI I/O 1718
GPI I/O 1819
GPI I/O 1920
GPI I/O 2021
GPI I/O 2122
GPI I/O 2223
GPI I/O 2324
GPI I/O 2425
Tally Ports
There are tally ports on the control panel and the frame.
The tally ports 1 and 2 on the control panel and the frame
have the same pinouts. On the frame, the tally ports are
identied by the slot and the port number.
12345678910111213
141516171819202122232425
Figure 31: Tally Port (female)
Table 27: Tally Rating
ValueSpecification
Solid-State Contact ClosureType
100VDCInput Voltage
120mAMaximum Current
Note: Tally ports 3 through 6 on the control panel are used for
the extended tallies option and require the extended tallies
hardware to be installed before they can be used.
Table 28: Panel Tally Locations
Port 6Port 5Port 4Port 3Port 2Port 1Pin
917355371911
937557392132
957759412353
977961432574
998163452795
10183654729116
10385674931137
10587695133158
10789715335179
Common10
Common11
Common12
Common13
9274563820
214
9476584022415
9678604224616
9880624426817
100826446281018
102846648301219
104866850321420
106887052341621
108907254361822
Common23
Common24
Common25
Contact Closure Ports
The contact closure (CtCl) ports are located at the back
of the frame.
12345678910111213
141516171819202122232425
Figure 32: Contact Closure Port (female)
Table 29: Contact Closure Rating
ValueSpecification
Solid-State Contact ClosureType
Acuity Setup Manual (v9.2) — Specifications • 113

Ross Acuity 4810AR-002 Specifications

General

Brand	Ross
Model	Acuity 4810AR-002
Category	Switch
Language	English