Ross Acuity 4810AR-002 - SideStick Button Configuration; To Name a SideStick Button

DescriptionTypeParam
Assign to a button that you want
use to select a different page. The
button will use the page selection
from Configure Pages.
NoneType
Assign to a button that you want
use to select a different camera.
The button will use the camera
selection from Configure Pages.
Camera
Select the next camera in the list.Next
Select the previous camera in the
list.
Previous
Use the CustCtrl knob to select
the custom control that you want
to assign to the selected button.
CustCtrl
Use the Go to page knob to select
the page that you want to jump to.
Go to page
Use the Camera knob to select
the camera that you want to
assign to the selected button
Camera
Use the Mode knob to select how
the positioner is used to control
the active camera.
Mode
Use the Shot knob to select the
shot on the camera that you want
to recall. The camera must support
shot recalls.
Shot
Use the Duration knob to select
the length of time, in seconds, that
it takes for the camera to move to
the recalled shot. The camera
must support shot duration.
Duration
To Name a SideStick Button
1. Press HOME > Setup > Personality > More >
SideStick Settings > Config Button Label.
2. Use the bottom knob to select the button that you
want to name.
3. Enter the new name in the New Name eld.
4. Use the Font knob to select the size and layout of
the font you want to use on the mnemonic displays.
5. Use the Color knob to select the color you want to
use for the mnemonics. This can be the background
or text color, depending on whether you have
selected an invert font.
• Standard — use the standard mnemonics color.
• Green — use a green color.
• Red — use a red color.
• Blue — use a blue color.
• Yellow — use a yellow color.
• Orange — use an orange color.
• Purple — use a purple color.
• ME X Glow — use ME Glow color X.
• Aux Glow — use the aux glow color.
• CC Glow — use the CC glow color.
• User Color X — use User Color X.
• None — don't use a color for the mnemonic.
6. Press Accept New Name.
Acuity Setup Manual (v9.2) — Panel Modules • 79