Ross Acuity 4810AR-002 - Control Panel Display Settings; Control Panel Display Brightness; To Set the Brightness of the Displays

• Aux Glow — use the aux glow color.
• CC Glow — use the CC glow color.
• User Color X — use User Color X.
• None — don't use a color for the mnemonic.
4. Use the Xpt Mode knob to select whether the
mnemonic show just the source name (1 Name),
or the source name and shifted source name (2
Names).
5. Press HOME > Confirm.
Control Panel Display Brightness
You can adjust the brightness of the control panel
displays. These displays include all the module displays
found on the control panel, but not the Touchscreen
display.
Tip: Lower brightness settings will prolong the life of the
displays.
To Set the Brightness of the Displays
1. Press HOME > Setup > Personality > Color
Schemes > More > Display Bright./Contrast.
2. Use the Display Brightness and Display
Contrast knobs to adjust the brightness and contrast
of the displays on the control panel.
Acuity Setup Manual (v9.2) — Color Schemes • 59