Ross Acuity 4810AR-002 - System Time Synchronization; Setting System Time Automatically

To Next Page

To Previous Page

Once the switcher is synchronized to the new NTP server,

Okay appears in the Status column. If Okay is not shown

next the IP address, check that the IP address is correct,

or that the switcher has access to the address.

18 • Network Setup — Acuity Setup Manual (v9.2)

Main Page

Default Chapter9
- Table of Contents9
Frame Boards14
- Frame CPU14
- Video Input14
- Multiprocessor Input14
- Video Output14
- 12G Output14
- 8RU Crosspoint and 4RU Crosspoint14
- 3G Video Processor14
- Reference with Tally14
Network Setup15
- Frame Network Setup15
  - To Set the Frame Network Settings15
- Control Panel Network Setup15
  - To Set the Panel Network Settings15
  - To Set the Panel DNS Resolver16
- Default Network Settings16
  - To Default the Frame Network Settings16
- Network Security17
  - To Set up User Accounts and Passwords17
- System Time17
  - To Set System Time Manually17
  - To Set System Time Automatically17
Video Reference19
- Supported Reference Formats19
- UHDTV1 Mode20
- Reference Setup20
  - To Set a Reference Format20
  - To Reset All Video Input Reference Formats20
    - To Reset All Video Output Reference Formats20
- Frame Synchronization / Format Conversion (FSFC)20
  - Supported FSFC Input Mode Video Formats21
  - To Set up an FSFC21
- Smartconversion22
- Switching Field23
  - To Set the Switching Field23
Video Input Setup24
- Input Sources24
  - To Set up Video Sources24
- UHDTV1 Sources25
- Multiprocessor Input Mode25
  - To Set the Multiprocessor Input Mode25
- Auto Key Setup25
  - To Set up an Auto Key Association25
- Source Names26
  - To Name a Video Source26
- Control Panel Button Inserts26
  - To Install a Button Insert26
- Bus Maps27
  - Editing Bus Maps27
  - Assigning Bus Maps28
- Non-Sync Detection29
  - To Set Non-Sync Detection for All Sources29
  - To Set Non-Sync Detection for an Individual Source29
- Tallies and Contact Closures29
  - To Assign a Tally/Contact Closure to an Input29
  - To Set up When a Tally Is Triggered30
Video Output Setup31
- Output Sources31
  - To Assign an Output Source to an Output BNC31
  - To Confirm a Video Output32
- UHDTV1 Video Output32
  - To Set up a UHDTV1 Output33
- Configurable Program Outputs (Multifeed)33
  - To Configure a Program Output33
  - Configurable Program Output Mode34
- Split ME Functionality34
- ME Layer Mode34
  - To Set an ME to Layer Mode35
- Ancillary Data35
  - To Set up the Ancillary Data35
- SMPTE 352 Payload Identification35
  - To Insert the SMPTE 352 Payload Identifier35
- Multiviewer35
- Fade to Black38
  - To Set Fade to Black38
- MIX/Dsk38
  - To Turn on the MIX/Dsk Option39
- Auxkey39
  - To Set up an Auxkey39
  - Auxkey Pre-Mixer/Keyer39
- Aux Bus Setup40
  - Aux Bus Names40
Personality41
- Personality Options41
  - Assign ME41
  - Audio Cut Only41
  - Audio Transition41
  - Auto Key Alpha41
- Auto Recall41
- Auto Remove Key41
- Aux Bus Names42
- Bank 0 Lit42
- BKGD Double Press42
- CC/Macro Attachments42
- CC Global Recall42
- CC Held/Paused Display42
- CC Memory State42
- Clear Bus Hold on All-All42
- DD Key Delegation43
- Default Trans Active43
- Default Trans Eff Rate43
- Default Trans FTB Rate43
- Default Trans Key Rate43
- Default Trans ME Rate43
- Default Sequence Rate43
- Double Press Rate43
- DSK Auto Cut43
- Editor Pattern Codes44
- Editor Trans Rate44
- Excammoveontrans44
- Fixed Memories44
- FTB Display44
- Global Mem Num Entry44
- Global-Store 4 Mode44
- Grab Camera Time45
- GUI Scroll Controls45
- Key Cut then Fade45
- Keypad Clip Ids Entry45
- Keypad DVE Num Entry45
- Keypad Still Num Entry45
- Keypad Wipe Num Entry45
- Key Priority Display Order45
- Knob List Expansion46
- Matte Limit46
- Memory Bank Cycle46
- Menu Module Indicator46
- Menu Numbers46
- Mouse Sensitivity46
- Multiple Customs46
- Open Shortcut on Top46
- Panel Sleep Time46
- Pbus Memory47
- Quick Bank Select47
- Recall Empty Memory47
- Recall Global-Store47
- Recall ME-Store47
- Recall Whiteflash47
- Re-Entry Depth48
- Re-Entry Loops48
- Roll Clip Mode48
- Roll Clip On-Air Only48
- Shift All Buses on a Row48
- Shift Locking48
- Show Attached Ccs48
- Show Ccs on Key Bus49
- Show Last CC Pressed49
- Show Last Mem Recalled49
- Store Mode49
- Swap Keyer Cut & Auto49
- Swap PGM/PST Buses49
- Swap Trans Cut & Auto49
  - Time Clock Source50
  - Time Clock UMD Number50
  - Ultrachrome Dflt Color50
  - Ultrachrome Dflt Mode50
  - Ultrachrome Dflt Width50
  - Virtual Panel Enable50
  - Virtual Panel Positioner Reset50
  - VTR POL On-Air Display50
  - VTR POL Prepped Display50
  - Wake up on Command51
  - Default ME Map51
    - To Set up a Default ME Map51
  - Auto Follow51
  - User Wipes52
    - To Assign a User Wipe52
GPI Control53
- GPI Trigger Types53
- To View the Status of a GPI53
- To Name a GPI53
- To Set the Direction of a GPI53
- GPI Inputs53
  - To Set up a GPI Input53
- GPI Tallies54
  - To Set up a GPI Tally54
- GPI Outputs54
  - To Set up a GPI Output54
- GPI Device Control54
  - To Assign a GPI Output to a Video Source54
Live Edit Decision Lists55
- To Set up Liveedl55
- To Start Capturing EDL Data55
- To Move EDL Files to USB55
- To Delete EDL Files55
Multipanel56
- Multipanel Setup56
  - To Assign an ME to a Panel56
  - To Set up Installation Menu Permission56
- Multipanel Operation56
Color Schemes57
- Menu Skins57
  - To Select a Menu Skin57
- Control Panel Button Colors57
- Mnemonic Color Schemes58
  - To Set the Mnemonic Colors58
  - To Set the Default Mnemonic Appearance58
- Control Panel Display Brightness59
  - To Set the Brightness of the Displays59
Device Control60
- Basic Serial Communications60
  - To Set up Basic Serial Communications60
- Basic Ethernet Communications60
  - To Set up Basic Ethernet Communications61
- Alternate Devices61
  - To Set up an Alternate Device61
- Custom Device Communication61
  - To Program a Custom Device Command62
  - Special Commands and Parameters62
- Extra Options63
- Flexdevice Drivers68
- Clip Setup68
  - To Assign a Clip to a Clip Register69
- Audio Channel Setup69
Auxiliary Control Panels71
- AP-AUX2RU Series Auxiliary Control Panels71
  - To Assign an AP-AUX2RU Series Auxiliary Control Panel to a Panel Row71
- V-053B Auxiliary Control Panels71
  - To Set up a V-053B Auxiliary Control Panel71
  - To Assign an Aux Bus to a V-053B Auxiliary Control Panel71
- Auxiliary Control Panel CCU Joystick Control72
  - To Set up a CCU Joystick Control72
Panel Modules73
- Installing or Replacing a Module73
- Module Setup74
- Custom Control Shot Box Module75
- Audio Control Module76
- Sidestick Module77
Color Correction80
- Proc Amp Color Correction80
  - To Apply Proc Amp Video Correction to a Source80
- RGB Color Correction81
  - To Apply RGB Color Correction to a Source81
- Defaulting Color Correctors81
  - To Default a Color Corrector82
- Copying and Pasting Color Correctors82
  - To Copy and Paste a Color Corrector82
High Dynamic Range (HDR) and Wide Color Gamut (WCG) Conversion83
- Supported HDR and WCG Conversion83
- HDR and WCG Conversion Methods84
- To Set the Scaling for Dynamic Range Conversion84
- HDR and WCG Reset84
  - To Reset HDR/WCG on Inputs84
  - To Reset HDR/WCG on Outputs84
Smartconversion85
- Conversion Loops85
  - To Set up a Conversion Loop85
- Smartconversion Setup85
Status87
- Software Version87
  - To View Software Version Information87
- Switcher Status87
- Status and Warnings88
  - To View the Status of the Switcher88
  - Status Definitions88
- Input Status89
  - To View the Input Status89
- Non-Sync Status89
  - To View the Non-Sync Status89
- Bus Selection Status90
  - To View the Bus Selection Status90
- Tx/Rx Status90
  - To View the Tx/Rx Status of the Control Panel Ports90
  - To View the Serial Tx/Rx Errors90
- FSFC Status90
  - To View the FSFC Status90
- Running Custom Controls Status90
  - To View the Custom Controls Currently Running90
Options91
- To Install a Serial Number91
- Installed Options91
- To Install a Software Option91
- To Backup Options Codes91
- To Recall Options Codes92
Calibration93
- To Calibrate the Fader and Positioner93
- To Turn Button LED Calibration off93
Control Panel Diagnostics94
- Installed Control Panel Boards94
  - To View the Installed Control Panel Boards94
- Module Tests94
- Control Panel Power Supply Failure95
  - To Identify a Failed Power Supply95
  - To Identify a Failed Cooling Fan96
- Panel Communications Hub Tests96
- Touchscreen Tests97
Frame Diagnostics98
- Installed Frame Boards98
  - To View the Installed Frame Boards98
- Frame Diagnostic Tests98
- Frame Fan Failure99
  - To Identify a Failed Fan99
- Frame Power Supply Failure99
  - To Identify a Failed Power Supply99
Port Monitoring and Logs101
- Port Monitor Files101
- Device Logging101
  - To Set the Device Log Level102
- Frame Logs102
- Panel Logs102
  - To Collect Panel Logs103
- Sending Files to Ross Video103
  - To Send Files to Ross Video103
Switcher Maintenance104
- Backup and Restore104
  - To Backup the Switcher Hard Drive104
  - To Restore the Switcher Hard Drive104
- Configuration Files104
  - To Download Configuration Files104
  - To Upload Configuration Files105
- Force Panel Upgrade105
  - To Force an Upgrade of the Control Panel105
- Still-Store Permissions105
  - To Clean Still-Store Permissions105
- Dusting Mode105
  - To Put the Switcher in Dusting Mode105
- Factory Default Settings105
  - To Recall Default Settings106
- Frame Over-Temperature Shutdown106
  - To Set the Frame Over-Temperature Shutdown Mode106
- Locking Menus106
  - To Lock a Menu106
- Power Supply Replacement106
  - To Replace a Control Panel Power Supply107
  - To Replace a Frame Power Supply107
- Replacing a Frame Board107
  - To Install a Frame Board108
Specifications109
- Switcher Resources109
- Rack Requirements110
- Hardware Weights110
- Operating Temperature110
- System Timing110
- LTC Timecode Input110
- Video Input Specifications110
- Video Output Specifications110
- Power Rating111
- Aux Power Ports111
- Serial Ports111
- External Link Ports112
- GPI Ports112
- Tally Ports113
- Contact Closure Ports113
Glossary115
Index118

Ross Acuity 4810AR-002 - System Time Synchronization; Setting System Time Automatically

Table of Contents

Related product manuals