Navigating the Web Interface
Logging Into the ZoneFlex Web Interface
ZoneFlex Indoor Access Point 9.8.1 User Guide, 800-70601-001 Rev C 111
Logging Into the ZoneFlex Web Interface
If you need to manage your AP, you do it with the features of the ZoneFlex Web
interface (which you already used to set up the AP for use).
If your ZoneFlex network is managed by a Ruckus Wireless ZoneDirector, you can
manage APs through ZoneDirector rather than logging into each AP’s Web interface
individually.
NOTE The following procedure assumes that you know the static IP address of
the AP (now in use), or you have some means of determining the dynamic IP address
in use by the AP. The PC you use for AP administration should be on the
management VLAN, if VLANs are used in your network.
To log into the Web interface
1 On the PC, open a Web browser window.
2 In the address or location bar, type the IP address of the AP. Default IP address
for standalone ZoneFlex APs:
192.168.0.1
3 Press <Enter> to connect to the Web interface.
4 If a Windows security alert dialog box appears, click OK/Yes/Proceed Anyway
to proceed. The Ruckus Wireless AP login page appears.
5 In Username, type super.
6 In Password, type sp-admin.
7 Click Login.
The ZoneFlex Access Point Web interface appears.
To Next Page
Loading...
