Introducing the ZoneFlex Access Point
Getting to Know the Access Point Features
ZoneFlex Indoor Access Point 9.8.1 User Guide, 800-70601-001 Rev C 36
ZoneFlex 7351 Access Point
NOTE The ZoneFlex 7351 requires a minimum of ZoneFlex firmware version 9.6
and later, SmartCell Gateway (SCG) 2.1 and later, or virtual SmartCell Gateway
(vSCG) 2.5 and later to operate.
ZoneFlex 7351 features five LEDs on its front panel and buttons and connectors on
its rear panel.
Front Panel
Figure 15 shows the top view of the ZoneFlex 7351. For a description of each front
panel part, refer to Ta ble 1 7 .
Figure 15. ZoneFlex 7351 top view
Table 17. ZoneFlex 7351 front panel elements
LED Description
PWR LED • Off: Off.
• Red: Boot up in process.
• Green: On.
OPT LED Not used in this model.
To Next Page
Loading...
