Configuring the Access Point
Configuring Wireless Settings
ZoneFlex Indoor Access Point 9.8.1 User Guide, 800-70601-001 Rev C 127
Configuring Common Wireless Settings
Common wireless settings are settings that are applied to all WLANs. On single
radio APs, go to Configuration > Wireless. On dual radio APs, you configure these
settings for the 2.4 GHz and 5 GHz radios independently by going to Configuration
> Radio 2.4G or Configuration > Radio 5G.
1 Go to Configuration > Wireless. The Configuration > Wireless > Common page
appears.
NOTE If you are using a dual band ZoneFlex AP, go to Configuration > Radio
2.4G or Configuration > Radio 5G.
Figure 63. The Configuration > Wireless > Common page
2 Make changes to the common wireless settings listed in Ta ble 4 6.
Table 46. Common Wireless settings
Setting Description
Radio Network (Dual radio APs only) Allows you to change the name of the
2.4GHz and 5GHz radios (default: “Radio 2.4G” and “Radio
5G”).
To Next Page
Loading...
