Configuring the Access Point
Configuring Wireless Settings
ZoneFlex Indoor Access Point 9.8.1 User Guide, 800-70601-001 Rev C 130
Figure 64. The ZoneFlex 7321 can be configured to operate in either 2.4GHz or 5GHz mode
Configuring Common Advanced Settings
Advanced wireless settings should only be changed by an experienced adminis-
trator. Incorrect settings can severely impact wireless performance. It is recom-
mended that the default settings are retained for best performance.
NOTE To fully benefit from the Access Point’s capabilities, it is advisable not to
change these values unless absolutely necessary.
1 On the Configuration > Wireless page, click Advanced Settings: Edit Common
Settings. The Configuration > Wireless > Advanced > Common page appears.
NOTE If you are using a dual band ZoneFlex AP, go to Configuration > Radio
2.4G or Configuration > Radio 5G > Edit Common Settings.
To Next Page
Loading...
