ZoneFlex Indoor Access Point 9.8.1 User Guide, 800-70601-001 Rev C 6
About This Guide
NOTE The AP may send a query to Ruckus containing the AP’s serial number. The
purpose is to enable your AP to autonomously connect with a wireless LAN
controller (vSCG) operated by your choice of cloud service provider. Ruckus may
transmit back to the AP the Fully Qualified Domain Name (FQDN) or IP address of
the controller that the AP will subsequently attempt to join.
You also understand and agree that this information may be transferred and stored
outside of your country of residence where data protection standards may be
different.
This ZoneFlex Indoor Access Point 9.8.1 User Guide describes how to install,
configure, and manage the Ruckus Wireless ZoneFlex Indoor Access Point (AP).
This guide is written for those responsible for installing and managing network
equipment. Consequently, it assumes that the reader has basic working knowledge
of local area networking, wireless networking, and wireless devices.
SNMP is enabled by default on all ZoneFlex standalone Access Points. For infor-
mation on how to disable SNMP management and other network management
options, refer to the Ruckus Wireless ZoneFlex Access Point User Guides, available
from the Ruckus Wireless Support website.
NOTE If release notes are shipped with your product and the information there
differs from the information in this guide, follow the instructions in the release notes.
Most user guides and release notes are available in Adobe Acrobat Reader Portable
Document Format (PDF) or HTML on the Ruckus Wireless Support Web site at
https://support.ruckuswireless.com/documents.
To Next Page
Loading...
Need help?
General
