Managing the Access Point
Upgrading the Firmware
ZoneFlex Indoor Access Point 9.8.1 User Guide, 800-70601-001 Rev C 178
Scheduling Automatic Upgrades
1 In the Upgrade Method options, click the button for your preferred choice.
2 Enter the required information in the related fields.
CAUTION! Do not change any of the Image Control File, Username or Password
entries.
3 Verify that the Auto Upgrade option is set to Enabled.
4 Tog g le t h e Interval to Check for Software Upgrade drop-down list to select your
preferred interval.
5 Choose whether to reboot immediately after upgrading, or schedule the reboot
for a specific time of day using the Schedule Reboot Time After Upgrade list.
Choosing Any Time (the default value) results in the AP performing a reboot
immediately after the automatic upgrade is successful.
6 You have two options at this point:
• Click Perform Upgrade, which starts the process and the clock. The next
upgrade occurs at the selected interval.
• Click Save parameters only. The clock starts right away, and the actual
upgrade occurs at the first selected interval.
After you click one of these two options, a status bar appears during the upgrade
process.
When the upgrade is complete, the AP automatically reboots at the time you
specified in Step 5.
To Next Page
Loading...
