Configuring the Access Point
Configuring Hotspot Service
ZoneFlex Indoor Access Point 9.8.1 User Guide, 800-70601-001 Rev C 154
2 Click Enabled next to Hotspot Service.
3 Review the settings in table Tabl e 55 , and make changes as needed.
4 Click Update Settings to save your changes.
You have completed the minimum settings for providing Hotspot service on this AP.
Additional configuration options are available using the Edit Settings buttons at the
bottom of the page:
• Customizing Hotspot Optional Settings
• Creating a Hotspot Walled Garden
• Allowing Unrestricted Access by MAC Address
Table 55. Hotspot configuration settings
Setting Description
Redirect unauth. user to Redirect unauthenticated users to the specified URL (login
page).
After user is authenticated Select where you want to redirect the user after successful
authentication.
• Redirect to the above URL: return to the login URL
configured above.
• Redirect to the URL the user intended to visit: upon
successful authentication, go directly to the URL that
the user originally entered (typically the browser’s home
page).
• Redirect to: specify a URL to which users are redirected
after authentication. This can be used to redirect users
to a “Login Successful” page, or a page that offers
connection time information or a Logout button.
Primary RADIUS Server Enter the IP address of the primary RADIUS server against
which users are authenticated (required).
Secondary RADIUS Server Enter the IP address of the secondary RADIUS server, if
one is available (optional).
RADIUS Server Secret Enter the shared secret for communication with the
RADIUS server (required).
To Next Page
Loading...
