3 – 68 HS40 Service Manual
3.6.16.1. System Configuration
Information about the DICOM server used by the system is displayed.
You can change the information, or add or delete a server. The server information is used to
identify the DICOM for the system within a network. It is also used to transfer data to other
DICOM servers.
For the ‘IP Address’, ‘AE Title’, and ‘Port No’ settings, contact your
organization’s network administrator.
■ Station Name
Enter the name of the system. Along with AE Title, it is often used to identify the system in
the DICOM network.
■ Port No.
Enter the port number of the server being used.
■ AE Title
Enter the name of the DICOM AE (Application Entity). Used for identifying the equipment that
uses DICOM on the network.
3.6.16.2. General Configuration
■ SR Format
Select a format to be used to save SR among General Report and Viewpoint.
■ Store SR at End of Exam
Select whether or not to store the S R at the end of the exam. When you select this checkbox,
the SR is automatically stored at the end of the exam. Otherwise, it is not stored.
To Next Page