Samsung HS40 - Page 145

Chapter 3. Installing Product 3 – 69
3.6.16.3. Adding DICOM Services
Click Add on the screen. A screen is displayed where you can enter a DICOM service to add.
After adding a service, click Apply to save the information. Tap Cancel to cancel.
■ DICOM Services
Select the type of servic e to use vi a DICOM. The supported DICOM servers are Storage, SC,
Worklist, Print, PPS, Storage SR, and QR.
■ Alias
Enter the name of the DICOM server.
■ AE Title
Enter the AE title of the DICOM server. Consult your network administrator before specifying
this option.
■ Ho st
Enter the IP address of the server being used. Consult your network administrator before
specifying this option.
■ Port No.
Enter the port number of the server being used. Consult your network administrator before
specifying this option.
■ Connect Timeout
The connection will time out if there is no response from the DICOM server within the
configured time period. You can specify this time period in seconds.
■ Read Timeout
Specify the Read Timeout time limit for the server you are adding.
■ Retry Interval
Specify how many seconds the system will wait before it retries a failed transmission. You
can specify this time period in seconds.
■ Maximum Retries
Specify how many times a failed transmission will be retried.
■ Packet Size
Specify the size of the transfer packet.