Chapter 3. Installing Product 3 – 75
■ Printer Setup
– Color: Specify whether to use colors. Select Grayscale or RGB.
– Orientation: Specify the paper orientation. Select either Landscape or Portrait.
– Magnification: Specify the interpolation when resizing an image to print. Select from
Replicate, Bilinear, Cubic, or None.
– Border Density: Specify the border color of the im age to be printed. Select Black or White.
– Priority: Specify a priority for the print command. Select High, Med, or Low.
– Destination: Specify the paper pathway. Select Magazine or Processor.
– Medium Type: Specify the material type for the printout. Select from Paper, Clear Film,
Blue Film, Mammo Clear Film, or Mammo Blue Film.
– Copies (1–99): Enter the number of copies to print, using a value between 1 and 99.
– Film Size: Select a paper size from 8×10 inches, 8.5×11 inches, 10×12 inches, 10×14
inches, 11×14 inches, 11×17 inches, 14×14 inches, 14×17 inches, 24×24 cm, 24×30 cm,
A4, or A3.
– Smoothing Type: This option is available only when Magnification is set to CUBIC. Enter
the value for the printer which is specified in the DICOM Conformance Statement.
– Empty Density: Specify the background color of an image to print. Select Black or White.
– Min Density: Specify the minimum brightness of an image to print. If this option is not
specified, the default value is applied.
– Max Density: Specify the maximum brightness of an image to print. If this option is not
specified, the default value is applied.
– Configuration Info: Specify the unique value for a printer. Please refer to the DICOM
Conformance Statement for the printer.
To Next Page
Loading...