Samsung Multifunction MultiXpress X322 Series - Page 134

ID card copying
134
6. Copying
Deleting a template
Select this setting for delete of manual ID copy template.
1
Press Machine Setup from the display screen.
2
Press the Application Settings > Copy Settings from the display
screen.
3
Select a Manual ID Copy Setup.
4
Select a template and press Delete.
Using the Manual ID copy
1
Press Copy from the display screen.
2
Press the Advanced tab > ID Copy from the display screen.
3
Press Manual ID copy, and then select the desired option.
• Template: Allows you to select an existing template (For more
information on creating templates, see "Setting up Manual ID copy"
on page 132).
• Print now: Prints only one side of the ID.
• ID Copy: Specifies the default ID Copy method (see "ID Copy" on
page 130).
4
Follow the steps on the display screen.
5
Place the front side of an original facing down on the scanner glass as
shown below, and close the RADF.