Confidential
Chapter 1 Before Installation
RF4402d Series Installation Manual v1.0 10
Copyright © 2018, All Rights Reserved.
No. Name Specification Purpose of use
10 Level
Normal For horizontality and verticality
11 Hammer Drill
Normal Wall Type Drilling
12 Concrete Drill Bit
0.55 in. (14 mm) For M10 Strong Anchor
13 Anchor Punch
M10 For M10 Strong Anchor
14 Hammer
Normal Anchor fixing
15 Vacuum Cleaner
Normal For removing dust during the drilling
work
16 Heating Gun
122~572°F (50~300°C) Shrinking Feeder cable tube
17 Cable Cutter
0.24~1.26 in. (6~32 mm) Cable cutting
18 Crimping Tool
AWG14~AWG4 (1.5~16 mm
2
) Pressure terminal for crimping
19 Wire Stripper
Apply cable thickness:
1.5~6.2 in. (4~16 mm)
Cable sheath for removal
20 Nipper
Basic Tool For cutting cable
21 Flush cutter
Basic Tool For cutting cable tie
22 LAN Tool
Basic Tool RJ45 Crimper
23 Industrial Scissor
Basic Tool Cutting
To Next Page
Loading...