Sanyo PLC HF10000L Service Manual

-11-
Be sure to reset the Scroll counter after replacing the filter
cartridge.
Press the MENU button to display the On-Screen Menu.
Use the Point ed buttons to select Setting and the press
the Point 8 button or the SELECT button.
Use the Point ed buttons to select Filter counter and
then press the SELECT button. Use the Point ed but-
tons to select Scroll countere reset and the press the
SELECT button. Scroll counter Reset? appears. Select
Yes to continue.
1
2
Resetting the Scroll Counter
Scroll counter
Another confirmation dialog box appears, select [Yes] to
reset the Scroll counter.
3
Be sure to reset the Filter counter after replacing the filter
cartridge.
Press the MENU button to display the On-Screen Menu.
Use the Point ed buttons to select Setting and then
press the Point 8 button or the SELECT button.
Use the Point ed buttons to select Filter counter and
the press the SELECT button. Use the Point ed buttons
to select Filter counter reset and the press the SELECT
button. Filter counter Reset? appears. Select Yes to
continue.
1
2
Resetting the Filter Counter
Filter counter
“Filter counter Reset?”
appears.
Select [Yes], then
another confirmation box
appears.
Select [Yes] again to
reset the Filter counter.
Another confirmation dialog box appears, select Yes to
reset the Filter counter.
3
Select “Used time” and the dia-
logue box below appears.
Select “Scrolls remaining” and
the dialogue box below appears.
“Scroll counter Reset?”
appears.
Select [Yes], then
another confirmation box
appears.
Select [Yes] again to
reset the Scroll counter.
Meintenance

Sanyo PLC HF10000L Specifications

General

Matrix size	1.65 \
Matrix type	3-panel (p-Si TFT active)
Projection distance	- m
Vertical scan range	48 - 100 Hz
Horizontal scan range	15 - 120 kHz
Projection technology	LCD
Contrast ratio (typical)	3000:1
Screen size compatibility	- \
Projector native resolution	-
Keystone correction, horizontal	30 °
Interface	USB
Power LED	Yes
RS-232 ports	2
Dimensions (WxDxH)	530 x 757 x 268 mm
Focus	Auto
Focal length range	- mm
Noise level	43 dB
Noise level (economic mode)	39 dB
Dot clock scanning frequency	230 MHz
Lamp power	380 W
Lamps quantity	2 lamp(s)
Light source type	Lamp
Service life of light source	2000 h
Service life of light source (economic mode)	3000 h
Composite video in	0
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
S-Video inputs quantity	1
Wi-Fi	No
Analog signal format system	NTSC, NTSC 4.43, PAL, PAL M, PAL N, SECAM
Supported graphics resolutions	1024 x 768 (XGA), 1280 x 1024 (SXGA), 1600 x 1200 (UXGA), 1680 x 1050 (WSXGA+), 1920 x 1200 (WUXGA), 640 x 480 (VGA), 800 x 600 (SVGA)
Product color	Gray
Power consumption (standby)	18 W
Power consumption (typical)	955 W
Cables included	AC, RS-232

Weight and Dimensions

Weight	27600 g