Sanyo PLC HF10000L - Keystone Adjustment; Keystone Correction Configuration

-45-
Optical Parts Disassembly
4 Integrator-in assy removal
Remove 2 screws-A(M3x6) and remove the integrator-in assy upward off.
Integrator-in assy
A
A
(M3x4)x2
(M3x4)x2
Integrator-in
Notch
Bumpy surface
comes this side.
Remove the cabinet top assy and main board to take the following disassembly.
3 Optical filter (LC-CS) removal
Remove 2 screws-A(M3x6) and YE LCD Cover, and remove the Optical filter (LC-
CS) upward off.
A
A
Optical filter (LC-CS)
Optical filter (LC-CS)
QR code
Prism side
YE LCD Cover