y The weight value for the reference objects is displayed.
t To determine the average piece weight, select Start.
y The reference piece count and the average piece weight are displayed.
You can now begin with the parts counting of unknown amounts.
t Place any amount of the objects on the weighing pan.
y The determined piece count is displayed.
t To display the weight value of this amount, select Weigh.
y The weighing results and all parameters are displayed.
t To count the next unknown amount, empty the weighing pan and place
the next amount of objects onto it.
y The calculated piece count and the weighing results are immediately updated.
Parts Counting
Cubis MSU User Manual 107
To Next Page
Loading...
