Sartorius Cubis Series - Page 143

Interfaces
Cubis MSU User Manual 143
ID Code Character K
h
The ID is based on model type,
e.g., not all units and IDs are
available for balances used in legal
metrology.
Device Information, Basic Data
Manuf. Manufacturer
Model Model
SerNo. Serial number
BAC: Balance version
APC: Display version
Print Function
Name Name
Task Profiles
Task Task name
TskDes Task description
User Profiles
User User name
UsrDes User description
Data Memory
MemNo. Memory number
MemID Memory ID
Basic Weighing
G# Gross weight 2
N Net weight
N1 Net weight (T1?0)
T Tare weight
T1 Tare weight 1
T2 Tare weight 2
Calibration/Adjustment
Set Target weight
Stat Status
Dev Deviation weight
s = Result ReproTEST
Leveling
LevRes Leveling result
SQmin Function
SQmin Minimum weight
Individual Identifiers
P-ID1 Print ID1
T-ID1 Task start ID1
I-ID1 Initialization ID1
R-ID1 Result output ID1
C-ID1 Component ID1
E-ID1 Evaluation ID1
X-ID1 Task end ID1
Density Determination
ID-Dk Name of density determina-
tion kit
n No. of wires
d Wire diameter
D Vessel diameter
Id-Liq Name of liquid
RefFl Density of liquid
b Coefficient of expansion
of the liquid
LA Correction for air density
Pl.vol Volume of glass plummet
Temp Temperature of liquid
RhoFl Density of liquid
Corr Correction factor of the den-
sity determination kit
Wa Weight of sample in air
Wfl Weight of sample in liquid
or weight of liquid
Wt Residual liquid
Wr Sample plus weight of liquid
Rho Density of sample
Vol Volume of sample
Statistics
nDef Default number of items
n Transaction counter
x Average value of the weight
values
s Standard deviation
of the weight values
sRel Variation coefficient
of the weight values
Sum Total of all weight values
Max Highest weight value
Min Lowest weight value
Dif Difference between highest
and lowest weight value