System Settings (Menu)
48 Cubis MSU User Manual
Network Ports Setup (Ethernet)
For more information on network operation, see “Network Interface” in Section
Interfaces.
t Select operating mode for the network interface.
No function / xBPI (expanded Sartorius communication / SBI (Sartorius standard
protocol) / Printer output / SICS protocol
t Select connection type.
Server or Client connection
t Configure the local TCP port.
t To save the settings, select Save.
Network Settings (Ethernet)
t Define the settings for network operation.
The Hostname (device name — max. 24 characters) set here can be printed on logs.
The IP address can be entered and set as a default or obtained automatically.
t To save the settings, select Save.
Control Input/Output (e.g., for Remote Switch)
If you have connected a remote switch, for example, via the peripheral or optional
port, you can define its function here.
t Configure the setting for each port.
To Next Page
Loading...
