Section 01 MAINTENANCE
Sub-Section 03 (FLUSHING AND LUBRICATION)
01-03-3
After approximately half a minute, close fuel valve
to run engine out of fuel while lubricating.
Disconnect the garden hose.
SP, SPX, GTS and XP Models
Unlock and remove coupler hose. Reinstall dust
cap over fitting spigot.
Remove hose pincher from water outlet hose.
All Models
Wipe up any residual water from the engine.
Remove spark plug cables and connect them on
the grounding device.
SP, GTS AND HX MODELS
1. Spark plug cables on grounding device
SPX, GS, GSI, GSX, GTI AND GTX MODELS
1. Spark plug cables on grounding device
XP MODEL
1. Grounding device
Remove both spark plugs and spray BOMBAR-
DIER LUBE lubricant into each cylinder.
Crank the engine a few turns to distribute the oil
onto cylinder wall.
Apply anti-seize lubricant on spark plug threads
then reinstall them.
Reinstall plug on air intake silencer cover.
-
CAUTION
When engine begins to run irregularly, im-
mediately close the water tap to stop water
flow before engine dies.
-
CAUTION
If used, remove the quick hose connector
from watercraft.
F01H64A
1
F00H0DA
1
F00H0AA
1
To Next Page
Loading...
Need help?
General