SEEDMASTER 2023
51
NOVA CONVEYOR OVERVIEW
Like lid operation, you must reverse the hydraulic flow of the oil to the seed fan (pressure to white
tagged hose) to operate the conveyor. This flow pressurizes the conveyor hydraulic block allowing
conveyor movement and hydraulic motor operation. You may see the lids open and arm lock release
when you reverse the fan flow depending on position of lid selector valve.
NOVA CONVEYOR CONTROLS
The Nova Conveyor is controlled with the Kar-Tech Wireless Remote and Receiver.
Its functionality includes:
1. Move Conveyor Inner and Outer Arms in and out.
2. Tilt Conveyor up and down.
3. Move Kick Out up and down.
4. Turn Belt On or Off.
E-Stop
The conveyor is equipped with an E-Stop functionality programmed into the Kar-Tech Remote. In case
of emergency and all conveyor functions need to be stopped, press the RED power button on your
remote. This will halt all conveyor operation. To resume, turn the remote on again or re-cycle power to
the receiver and re-engage the conveyor functions as they were before stopping.
To Next Page
Loading...