Segway Personal Transporter i2 - Page 43

Segway®PersonalTransporteri2,x2,x2Turf PartsReplacementGuide 4‐9
To install tire tube:
z Use only Segway-approved tube (18911-
00001—single; 21193-00001—quantity five).
The 90-degree bend in valve stem is
necessary for proper clearance.
z To install new tire (use Segway part number
20543-00001), seat outside bead on wheel by
hand before installing tube (Figure 4-12).
1. MakesureSegwayPTispoweredoffand
unplugged.
2. Reminder:We
arsafetyglasses.
3. Inflatetubewithjusten
oughairtogivetube
acircularshape(Figure4‐13).
Figure4‐13:InflateTubeUntilCircularinShape
4. Alignvalvestemwithopeninginrimand
feedtubeintotirearoundrim(Figure4‐14).
Makesurethe
rearenokinks,bends,orfolds
intube.Pushvalvestemthroughopeningin
rim.
Figure4‐14:FeedTubeintoTireAroundRim
5. Workoutsidebeadbyhandbackoverrimas
muchaspossible(Figure4‐15).
Figure4‐15:WorkOutsideBeadbyHand
A puncture can occur if tube is pinched between
tire iron and tire bead or rim.