Segway Personal Transporter i2 - Page 69

Segway®PersonalTransporteri2,x2,x2Turf PartsReplacementGuide 8‐7
Figure8‐7:TapGearboxtoSeatAgainstChassis
Do not use gearbox fasteners to seat gearbox to
chassis. Make sure gearbox and spacer are
completely seated prior to tightening gearbox to
specified torque. Failure to do so could result in
stripped chassis holes.
10. Install(3)newgearboxfasteners(20537‐
00002).Threadinbyhand,andthentorque
to40N‐musingT‐456‐lobewrenchwith3/
8”‐drivesocket.SeeFigure8‐8.
Figure8‐8:InstallGearboxFasteners
11. Reinstallfasciatrim(page6‐4).
12. Rei
nstallgearboxtrimcover(page6‐5).
13. (Modeli2
)Reinstallfender(page5‐3).
(Modelx2
)Reinstallfender(page5‐4)and
fenderframe(page5‐5).
14. Rei
nstallappropriatetire/wheelassembly:
• Modeli2(page4‐3)
• Modelx2(page4‐4)
• Modelx2Turf(page4‐5)
15. Rei
nstallmats(page2‐3).
16. Rei
nstallLeanSteerframe(page1‐6).
17. Pe
rformpost‐servicetests(pageA‐1).
flange
Gearbox
20919-00001
20537-00002