Segway SE-3 Patroller - Introduction; Purpose; Audience; Certification

5
Introduction
Purpose
The purpose of this manual is to provide instructions for servicing the Segway SE-3
Patroller.
Audience
This manual is written for Segway Certified Service Technicians working under
agreement with Segway Inc.
Certification
Becoming a Segway Certified Service Technician, SE-3 Patroller, involves a two-level
certification process. The service technician will be required to undergo training
at each level. Upon satisfactory completion of this training, the service technician
becomes certified to repair the SE-3 Patroller parts and assemblies according to the
following scheme:
Level Parts and Assemblies Instructions
1 • Body Panels
• Tire/Wheel Assemblies
• Windshield
• Lights
• Battery Compartment
• Bib Components
page 11
page 27
page 31
page 33
page 43
page 47
2 • All Level 1 (see above)
• Brakes
• Controls
• Siren
• Rider Detect Mat
• Drive Train
• Steering Column
• Power Interface
• Harnesses
See above
page 51
page 69
page 77
page 81
page 85
page 93
page 99
page 107
Table 1: Certication Levels