SE-3 Patroller8
Battery Module
Tools Required: None
Removal
1. Make sure the SE-3 Patroller is powered off,
unplugged, and the parking brake is engaged.
2. Flip out and twist the latches as shown in Figure 1.
3. Use the handle to slide the Battery Module part way
out.
4. Grasp both the front handle and the top handle of the
Battery Module (Figure 2). Slide the Battery Module
completely out.
Figure 2: Slide the Battery Module out of the SE-3 Patroller
Figure 1: Flip Out and Twist the Battery Module Latches
Flip latches out
Twist latches inward
Battery Module
To Next Page
Loading...