Service Manual 9
Installation
1. Make sure the SE-3 Patroller is powered off,
unplugged, and the parking brake is engaged.
2. Make sure the latches are configured as in Figure 3.
3. Holding the Battery Module by both front and top
handles, slide it into the opening.
4. Twist the latches and fold them back (Figure 4) to
lock the Battery Module.
Figure 3: Slide the Battery Module into the SE-3 Patroller
Close latches to lock
Twist latches outward
Figure 4: Twist and Close the Battery Module Latches
Battery Module
To Next Page
Loading...