SE-3 Patroller128
Ride Test
Verify that the SE-3 Patroller drives as expected. Make sure that driving and turning
are smooth and easy, and there is no binding of the handlebar, cabling, or wiring.
1. Drive forward.
2. Drive backward.
3. Turn the handlebar full left and drive in a circle.
4. Turn the handlebar full right and drive in a circle.
Charge Test
1. Use an IEC cable to connect the SE-3 Patroller to a powered outlet.
2. Verify that the screen displays the charging icon.
Post-Service Tests
To Next Page
Loading...