SE-3 Patroller6
Related User Materials
The following additional materials may be needed for reference during service:
• Segway SE-3 Patroller User Manual
Please check the Segway website (www.segway.com) for updates to the User
Manual, or contact Segway to confirm you have on hand the most recent service
publications.
General Service Procedure
Before performing any service on the SE-3 Patroller, you must first determine which
components may be damaged or malfunctioning. In some cases this requires a
simple visual inspection — as in the case of a cracked or damaged body panel. In
other cases diagnostic equipment must be used to troubleshoot the problem —
as when the vehicle turns on but won’t drive. No matter what the problem is, the
general service procedure is the same:
1. Identify — identify the symptoms.
2. Diagnose — determine which components may be malfunctioning.
3. Replace — replace the malfunctioning component(s).
4. Verify — operate the vehicle to verify the problem has been solved.
It may be the case that there are multiple problems affecting an SE-3 Patroller. Try
to isolate the problems and solve them one at a time.
Introduction
To Next Page
Loading...