129
Overview
Fasteners are listed by part number. For each fastener a variety of information is
provided, including:
• Type of fastener
• Location used
• Quantity used per part
• Drive used when installing/removing
• Torque required at this location
• Image, actual size
Safety
WARNING!
• Use only Segway-approved fasteners. Other fasteners may not perform as
expected and may come loose.
• Do not tighten or reuse any lock nut. Instead, when any lock nut is loose or
removed, replace the lock nut with a new Segway-approved lock nut.
• Before using a fastener, make certain the fastener is the correct size and
type with any necessary washer and thread lock in place.
• Do not attempt to repair any stripped or damaged screw hole. Instead,
replace the part. If a replacement part is not available, do not reassemble.
• Insert fasteners slowly and carefully. Do not cross-thread or over-tighten
fasteners. Tighten only to the prescribed torque.
• Failure to adhere to these warnings could lead to serious injury or death or
damage to property.
Fasteners
To Next Page
Loading...