6-22
Installation Conditions and Method
6
Note
External dimensions of extension camera cable (IV-S20EC2/4)
(Unit: mm)
49.1 52.2
4000 (IV-S20EC4)
2000 (IV-S20EC2)
φ16.9
φ7
φ16.9
- When the camera cable and extension camera cable (IV-S20EC2/4), leading to the camera
body (IV-S20C1), is bent, its bending radius should be longer than 40 mm.
If the camera cable will be bent repeatedly during operation, design the cable layout so that
the bending radius is 75 mm or more and use components that can be flexed up to 2 million
times.
Camera cable
Bending radius: Min. 40 mm
To Next Page
Loading...