9-16
Shared settings
9
Not done
Done
All recording is finished
Previous menu
Select the data to be calculated
Enter the number of styles
Carry out a calculation
Enter the upper and lower limits
Record the measurement criteria
2 OBJECT TYPE (type)
Specify the output for the
results of the calculations
1 CALC. RESULT
3 FORMURA
(style)
Set the judgment output conditions
5 OUTPUT (output)
6 TEST A RUN
4 UPPER & LOWER LIMIT
6 TEST A RUN
7 UPPER MENU
Setting the headings on the [NUMERIC CALC]
(numerical calculation) menu.
Note: Make sure that a test
is run using the
[EVALUATION
COND] (evaluation
condition) menu
before making any
calculations.
[Setting procedure]
[Output error]
An error will be output if there are too many digits as well as if there is an attempt to divide by
zero.
[Order of calculation]
The calculation results are produced in order, from N00 to N15.
[Parallel output based on the output conditions]
It is possible to use the parallel output for the evaluation results from the calculations by selecting
the PC function in the output conditions (the general output conditions are taken from the output
conditions set for each measurement program)
To Next Page
Loading...
Need help?
General