25
Absolute system
communication
I/O enable
(Delta PLC )
When ABSE is activated, it can initialize an absolute system and
enable ABSQ, ABSR, ABSC, and ABSD as well. No matter what
the original functions of DI4, DO2, and DO3 are, they will change
to the function of ABSQ, ABSR, and ABSD respectively. ABSC
can be assigned via the DI parameter setting.
Absolute system
communication
I/O enable
(Mitsubishi PLC )
When ABSM is activated, it can initialize an absolute system and
enable ABSR, ABST, ABSB0, ABSB1 and ABSC. No matter what
the original functions of DI4, DO2, DO3, and DO4 are, they will
be switched to the function of ABSR, ABST, ABSB0, and ABSB1
respectively. The ABSC can be set via the DI parameter setting.
Absolute system
origin setting
When ABSC is activated, the pulse number of absolute encoder
will be reset to zero. ABSC is effective only when ABSE or ABSM
is valid and ON.
To stop the motor running when STOP is activated.
Recursion running command of turret operation
Step running command of turret operation
Speed option 2 of turret operation
To Next Page
Loading...
Need help?
General
