59
(3) Hexadecimal parameter
Example: PE01 is 03760135, then to change to 0x03740135.
Press “SET” once.
The lower 4 digits of PE01 are shown and the underline of highest digit
indicates that this is low word.
Press “MODE” once.
The higher 4 digits of PE01 are shown and the up segment of highest
digit indicates that this is high word.
Press “MODE” once.
It shows the lower word again.
Press “SET” twice.
The lowest digit of PE01 would be flickering.
Press “SET” 4 times.
This flickering digit shifts to the lowest digit of high word.
Press “DOWN” twice.
The display shows the modification.
Press “SET” once to store the modification.
To Next Page
Loading...
Need help?
General
