SICK Bulkscan LMS511

OPERATING INSTRUCTIONS | Bulkscan LMS511 8014829/ZNC5/2017-06-06 | SICK
Subject to change without notice
12
ON SAFETY
2.5 Environmental protection
The Bulkscan has been designed to minimize its impact on the environment. It con-
sumes only a minimum of energy.
At work, always act in an environmentally responsible manner. For this reason, please
note the following information on disposal.
2.5.1 Power consumption
• The Bulkscan consumes a maximum of 25 W in operation without output loads.
• If the operating temperature of the sensor drops below 5 °C, the Bulkscan switches
on the heating. The sensor then consumes a maximum of 90 W.
2.5.2 Disposal after nal decommissioning
 Always dispose of unusable or irreparable devices in accordance with the applicable
specicnationalwastedisposalregulations.
 Dispose of all electronic assemblies as hazardous waste. The electronic assemblies
are easy to dismantle.
SICK AG does not currently take back devices that are unusable or irreparable.
2.6 IP technology
SICK uses standard IP technology in its products. The emphasis is placed on availability
of products and services. SICK always assumes the following prerequisites:
• Thecustomerwillensuredtheintegrityandcondentialityofthedataandrights
affected by the use of the aforementioned products.
• Inallcases,appropriatesecuritymeasures,suchasnetworkseparation,rewalls,
virus protection, and patch management, is be taken by the customer on the basis of
the situation in question.
Note