SICK Bulkscan LMS511

OPERATING INSTRUCTIONS| Bulkscan LMS5118014829/ZNC5/2017-06-06| SICK
Subject to change without notice
15
PRODUCT DESCRIPTION
3.4 Status indicators
In measuring mode the sensor operates fully automatically. The diagnostics LEDs and
the 7-segment display indicate the operational status of the Bulkscan.
Fig. 3: Status indicator
Display Meaning

Bulkscan ready and error-free

Error. Pay attention to the 7-segment display.

Slight contamination. Clean the front screen.

Flashing: Heavy contamination. Clean the front screen.

Information: Check ambient conditions. Measurements continue. Pay
attention to the 7-segment display.

Warning. Measures must be taken by the operator. Measurement
has been interrupted. Pay attention to the 7-segment display.
7-segment display The 7-segment display shows diagnostics messages on errors or
faults that occur (see "10.3 Error and status indicators on the 7
segment display“ on page 65).
Tab. 2: Meaning of the status indicators