SICK Bulkscan LMS511 User Manual

OPERATING INSTRUCTIONS | Bulkscan LMS511 8014829/ZNC5/2017-06-06 | SICK
Subject to change without notice
8
ON SAFETY
2 On safety
This chapter concerns your own safety and the safety of the equipment operator.
 Please read this chapter carefully before you begin working with the Bulkscan.
2.1 Authorized personnel
The Bulkscan must only be installed, commissioned, and serviced by adequately quali-
edpersonnel.
Risk of damage!
RepairworkonBulkscanmayonlybeperformedbyqualiedandauthorizedservice
personnel from SICK AG.
Thefollowingqualicationsarenecessaryforthevarioustasks:
Activities Qualication
Mounting and mainte-
nance
Basic practical technical training
Knowledge of the current safety regulations in the workplace
Electrical installation
and replacement
Practical electrical training
Knowledge of current electrical safety regulations
Knowledge of the operation and control of the devices in their partic-
ularapplication(e.g.,conveyor)
Commissioning, opera-
tion,andconguration
Knowledge of the operation and control of the devices in their partic-
ularapplication(e.g.,conveyor)
Knowledge of the software and hardware¬ environment in the relat-
ed application
Basic knowledge of the Windows operating system used
Basic knowledge of data transmission
Tab. 1: Qualied safety personnel
2.2 Correct use
The Bulkscan is a non-contact optical sensor for the measurement of volume, volume
owrate,mass,massowrate,determiningthecenterofgravityofbulkonconveyor
belts, monitoring of the bulk edges and monitoring of the conveyor belt edges.
It must only be used by authorized personnel and only in industrial environments.
IntheeventofanyotherusageormodicationtotheBulkscan,e.g.,duetoopeningthe
housing during mounting and electrical installation, or to the SICK software, any claims
against SICK AG under the warranty will be rendered void.
TheBulkscanmustonlybeoperatedinthespeciedambienttemperaturerange(see
"11.1 Bulkscan LMS511 data sheet“ on page 68).
2.3 General safety notes and protective measures
Safety notes!
Observe the following to ensure the correct and safe use of the Bulkscan.
• The notes in these operating instructions (e.g., regarding the use, mounting, installa-
tion or integration into the machine controller) must be observed.
• AllofcialandstatutoryregulationsgoverningoperationoftheBulkscanmustbe
complied with.
Note

SICK Bulkscan LMS511 Specifications

General

Brand	SICK
Model	Bulkscan LMS511
Category	Accessories
Language	English