SICK Bulkscan LMS511

OPERATING INSTRUCTIONS | Bulkscan LMS511 8014829/ZJ56/2017-02-15| SICK
Subject to change without notice
88
APPENDIX
outHeight
Bulk height
Parameter Variable type Value range Unit
Lower limit oat_32 0 … 20 m
Upper limit oat_32 0 … 20 m
Lower hysteresis oat_32 5 … 95 %
Upper hysteresis oat_32 5 … 95 %
outDensity
Bulk density
Parameter Variable type Value range Unit
Lower limit oat_32 0 to 50 t/m³
Upper limit oat_32 0 to 50 t/m³
Lower hysteresis oat_32 5 to 95 %
Upper hysteresis oat_32 5 to 95 %
outSpeed
Belt speed
Parameter Variable type Value range Unit
Lower limit oat_32 0 to 30 m/s
Upper limit oat_32 0 to 30 m/s
Lower hysteresis oat_32 5 to 95 %
Upper hysteresis oat_32 5 to 95 %
13.1.12 Reference measurement (compensation function)
Permissible commands: sRN, sEN
Variable name Description Variable type Value range Unit
ccStatus
Status of the reference mea-
surement
uint_8 0: Deactivated
1: Active
ccMeasVolume1
Measured volume
(reference measurement 1
to 10)
oat_32 m³
ccMeasVolume2
ccMeasVolume3
ccMeasVolume4
ccMeasVolume5
ccMeasVolume6
ccMeasVolume7
ccMeasVolume8
ccMeasVolume9
ccMeasVolume10