SICK FLOWSIC200 - Check Cycle Output on the Analog Output

Product description
FLOWSIC200 · Operating Instructions · 8013271/1CJ9/V2-0/2022-01 · © SICK Engineering GmbH 29
2.4.3 Check cycle output on the analog output
A check cycle is output as follows:
 90 s zero value (live zero)
 90 s span value
 The output duration of 90 s is the default factory setting. The value can be
changed in SOPAS ET (
 p. 77, §)
 The output is only useful for velocity-dependent measured values (flow
velocity).