118 FLOWSIC200 · Operating Instructions · 8013271/1CJ9/V2-0/2022-01 · © SICK Engineering GmbH
Specification
7.3
Accessories
7.3.1 Accessories for mounting
7.3.2 Connection cable, sender/receiver unit - junction box
7.4 Options
7.4.1 MCU control unit
Additional options for MCU control unit in wall housing
Additional options for MCU control unit in 19" slot
Designation Part No.
Mounting kit 2M8-1.4529 2031886
Mounting kit 4M8-1.4529 2031887
Mounting kit 2D8-1.4571/PA 2031888
Mounting kit 4D8-1.4571/PA 2031889
Mounting kit 2D4-1.4571/PA 2031890
Mounting kit 2M8-1.4571 2031891
Designation Quantity Part No.
Connection cable, length 2 m, halogen-free 2 2048074
Connection cable, length 25 m, halogen-free 2 2048075
Designation Part No.
Analog input module, 2 channels, 100 Ω, 0/4...22 mA, electrically
isolated (80 V difference)
2034656
Analog output module, 2 channels, 500 Ω, 0/4...22 mA, electrically
isolated per module
2034657
Digital output module, 2 channels as NC contact 2034659
Digital output module, 4 channels as NO contact 2034661
Designation Part No.
Module carrier (each for one AI, AO, DI or DO module) 6028668
Connection cable for optional I/O module 2040977
Profibus DP interface module with MCU connection cable 2048920
Ethernet interface module with MCU connection cable 2055719
Ethernet interface module, 3-fold, with MCU connection cable 2072693
Modbus RS485 interface module with MCU connection cable 2048958
Modbus TCP interface module with MCU connection cable 2059546
Designation Part No.
I/O module carrier 19” (for installation of up to 4 AI/AO and DI/DO modules) 2050589
Interface module 19” Profibus DP with connection cable 2049334
Interface module 19” Ethernet with connection cable 2048377
Interface module 19“ Modbus RS485 with connection cable 2050674
To Next Page
Loading...
