Siemens Hipath 5000 User Manual

Step by Step
Team and Executive/Secretary Functions with Trunk Keys
100
Answering Calls with Trunk Keys
Precondition: Your telephone is ringing and/or the
trunk key is flashing rapidly.
if necessary Press the rapidly flashing trunk key.
This is not necessary if the trunk is automatically as-
signed to you when you lift the handset or press the
"Loudspeaker" key; in this case the assigned trunk key
lights up.
n Lift the handset.
or On-hook: Use speakerphone mode.
Making Calls with Trunk Keys
if necessary Press the free trunk key that you want to use to set up
your call.
This is not necessary if the trunk is automatically as-
signed to you when you lift the handset or press the
"Speaker" key; in this case the assigned trunk key lights
up.
o Dial the station number.
n When the other party answers: Lift the handset.
or On-hook: Use speakerphone mode.
Using a Trunk Key to Place a Call on Hold and
Retrieve it Again
Precondition: You are conducting a call over a trunk in
your group. The US: "Hold" UK: "Common Hold" key has
been programmed on your telephone Æ page 69.
Placing a call on hold:
Press the US: "Hold" UK: "Common Hold" key.
if necessary
t or Replace the handset or press the key.
Depending on the configuration (contact your service
personnel), this may be necessary so other team mem-
bers can also pick up the call on hold.
Release

Siemens Hipath 5000 Specifications

General

Brand	Siemens
Model	Hipath 5000
Category	Telephone
Language	English