Siemens Hipath 5000 User Manual

Step by Step
Saving Station Numbers, Functions, Procedures and Appointments
72
Assigning a Procedure (Operating
Steps) to a Key
Station numbers and functions which require additional
inputs, i.e. comprise several operating steps, can be
saved to a single key on your telephone.
Using the associated dial function, for example
Æ page 39, you can save all the remaining inputs re-
quired (station number of the calling party + the station
number to be dialed) to a single key.
Station numbers which require additional inputs but
also dial pauses can also be stored.
Press the key. The LED lights up.
> : Select and confirm.
or
qme Enter the code.
Press the key. If the relevant key is already pro-
grammed, the programmed function appears on the
screen.
: Confirm.
> : Confirm.
o Enter the procedure, for example, "*67 231
089123456".
*67= code for associated dial
231= station number of the calling party
089123456 = number to be dialed.
if necessary
To insert pauses, press this key (a "P" is displayed).
:
:
Confirm.
or If you make a mistake:
> : Select and confirm. This deletes all digits entered.
: Confirm.
or
> : Select and confirm.
Program/Service
*
91=Prog. feature key?
Change feature?
Procedure key?
Redial
US: Save entry?
UK: Save?
Previous?
End?
Program another key?

Siemens Hipath 5000 Specifications

General

Brand	Siemens
Model	Hipath 5000
Category	Telephone
Language	English